SoundGraffiti

SoundGraffiti Dimmer Pack 2.1

SoundGraffiti Dimmer Pack 2.1 – a standalone device operating with the SoundGraffiti algorithm. The device converts input sound signal to DMX512 output for light dimmers.
======================================================

• The original SoundGraffiti algoritm (based on SoundGraffiti Dimmer program algorithm)
• Up to 16 DMX512 channels output
• DMX512 input/output. Insert/mixed SoundGraffiti frame to/with input frame (see User Manual)
• Sound signal input
• Upgradeable firmware
• Change/save parameters of algorithm on PC and record it to the device
• Program/drivers for Windows 2000/XP/Vista
• Adjustment for signal and noise levels
• Control indicators (16 channels + 3 levels + control)
• Input/Output Protocol: DMX512 ( DMX input must be terminated by external 120 ohm 0.5W resistor)
• Input/Output DMX connectors: standard 5 pin "XLR"

=======================================================

• The firmware program may be changed according to your wishes (especially for useful items)
• We can help you customize the parameters of algorithm for your music

=======================================================

• In the case of technical failure (fault of the manufacturer, during 2 years ), the device will be replaced by a working device or you'll get a refund (the device must be send to the manufacturer, postage back to the buyer, PayPal only)

======================================================

• Size: 134x135x51 mm
• Weight: 0.2 kg
• Power: 1.5 W (from USB port of computer or from power supply 5V/300mA)

======================================================

• The order includes:
• SoundGraffiti Dimmer Pack 2.1
• Power supply AC-DC 5V/500mA (110-250 VAC, 50/60 Hertz - Europlug 250 V unearthed).
• Replacement USB Cable (mini USB)
• Audio Connectors (plug) 3.5mm

======================================================

Output DMX frame:
Break – 140uS,
MaB – 180uS ,
Refresh rate – 20Hz