Program SoundGraffiti Dimmer

      The program converts input sound signal from an input signal from a microphone, line input, or computer's outputs to output signals for a DMX transmitter device (or another device) for dimmers. The operating procedure with DMX transmitters - > is explained at the vendor’s site or on the Dongle devices page. On this page you may also find source code (examples for another DMX transmitters.
SoundGraffiti Dimmer works with the following DMX transmitters:

*Note1 : On some computers problems are possible. In case of problems please contact our support team.
Before purchase please check your software and drivers !!!

Select Input : Select Source Sound Signal. (If it does not work -see: Setting Sound Input from hard disk of computer)
File : Save and load parameters ( *.scm files )
Style of Music : Select fixed parameters
DMX Config : Opens a window for allocation of DMX channels .
("Quantity of active channels" - Number of channels DMX column . 

DMX Output :
You can choose the program, which will transfer the data of SoundGraffitiDimmer through LPT (parallel port), COM (serial port), USB or network to the external dimmer device (such ArtNet_SG.exe– for devices of ArtNet).
Start - Start an output program for data transfer.
Pause - Pause transmitting.
Home page – Vendor's home page.
Auto Start - Auto start transmitting.  
Test – for test output devices :

Limitations ( without license code ) :
The operating time with data transfer (Output Data - change) to other program is limited to approximately 5-10 min. For unlimited use it is necessary to buy the program.
Buy the program : Menu->Help->Buy Now .
After payment, please :
- Select Menu: Help->Get authorization code
- Send an E-Mail to support with the authorization cod e ( in order for us to generate a License Key)
- You will soon receive an email from SoundGraffiti with the Licence Key . Type it in the License Key field, and your done! .